Expert Answers about Clevis Hitch
- Recommended 2-Tang Clevis for 3 Inch Trailer Hitch
- It sounds like you are looking for a 2-Tang clevis hitch for the 3" receiver on your vehicle. Since there is no 3" option I recommend the Gen-Y 2-Tang Clevis for 2-1/2" Hitch Receivers - 21,000 lbs # 325-GH-069. Along with this clevis hitch you will need the Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2" # C45408. This adapter will allow you to use the clevis hitch with your 3" receiver.
view full answer... - Clevis Hitch Connections For Trailer With Two-Tang Clevis With 1" Clevis Pin
- If your truck has a 2" hitch receiver and you want to make connections with a 1" clevis pin then you can use the MaxxTow # MT70034 two-tang clevis rated for 5,000 pounds. If you need more capacity you could use the Convert-A-Ball # AMCC2 rated for 10,000 pounds, or the Gen-Y # 325-GH-069 rated for 21,000 pounds.
You will also need a 5/8" hitch pin to hold your clevis on your truck receiver like the chrome plated JR Products # 37201065. For the equipment end you will need a 1" clevis...
view full answer... - Clevis Pin Recommendation for 12K Shocker Hitch Impact Cushioned Adjustable Clevis
- The Shocker Hitch Impact Cushioned Adjustable Clevis # SHK33RR has a 1-1/4" diameter hole for the clevis pin so I recommend using the Curt Clevis Pin with Handle and Clip # C45803 which has a 1" diameter, measures 5-3/4" long, and features an easy grab handle for simple installation and removal of the pin.
view full answer... - Hitch Tube Recommendation for Mounting Clevis Hitch for 2 inch Hitch
- Sounds like you possibly are looking for a hitch opening to attach to something for mounting a clevis in that is designed for a 2 inch hitch. For that we have the Combo Bar # E-9 which happens to be 6 inches in length. The pin hole though is much smaller at 5/8 inch.
view full answer... - How to Use Safety Chains on a Gooseneck Trailer
- For a safety chain that will be sufficient for most gooseneck trailers I really like the Fulton Safety Chain with Clevis Hook part # FCHA0050324. This safety chain has a grade 70 rating with large clevis hook. You will need two of them for your trailer. The end opposite of the clevis hook will attach to the nose of a trailer via a bolt and the clevis hook will attach to the gooseneck hitch you have in your truck bed. Almost all gooseneck hitches will have a set of holes that can be used...
view full answer... - Recommended Ball Mount With Clevis For ATV Towing
- A hitch ball will give you better control for backing up your travel trailer with your ATV. I recommend the Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise # C45009. This will give you the clevis as well as a 2 inch ball for your application. If you need the entire system, I recommend the Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 2" Hitch Ball # C45038.
view full answer... - Clevis Hook Recommendation to Fit Safety Chain Loops of 2017 Ford F-250
- The Clevis hook part # 6495-401-04 that you referenced is standard enough size that it would work well on the hitch of your 2017 Ford F-250. I attached a picture for you to check out that shows the dimensions of the opening. The post that fits through the links of the chain is 7/16 inch in diameter.
view full answer... - Clevis/Ball Mount that Fits 1-1/4 inch Trailer Hitch
- The closest option we have would be the Brophy Clevis Mount for 1-1/4 inch hitches part # CM91 which can use a standard ball mount or can have a clevis pin part # CP91 installed.
For trailer balls, use # 19256 for a 1-7/8 inch ball and # 19258 for a 2 inch ball.
view full answer... - Ball Mount with Clevis Attachment for a 2006 MPT 1200 G
- If your MPT has a 2 inch trailer hitch opening then you might like the Convert-A-Ball multi-hitch ball mount # CAB-6W which has all 3 common ball sizes and the ability to accept a lunette ring, spade or clevis. This ball mount has you covered with all of those options.
I have also included a link to the ATV multi-functions mounts that we have. All of them fit 2 inch trailer hitch receivers. If you have a different size let me know.
view full answer... - Will Tow Ready Trailer Hitch Receiver Mounted Tow Strap Accept 1 Inch Diameter Clevis Pin
- The Tow Ready Trailer Hitch Receiver Mounted Tow Strap Loop # TR63046 referenced in your question will indeed accept a 1 inch diameter clevis pin. This receiver mounted tow ring is designed for 2 inch trailer hitch receivers and has a weight capacity of 8,000 pounds. The tow ring and pin are included with the assembly.
I have attached a couple short video demonstrations on this product that you can also check out.
view full answer... - Clevis Hook Safety Chain Recommendation for a 2014 Ram 2500 with Hitch Prep Gooseneck
- I would check out the Fulton Safety Chain # FCHA0070324. These chains have a large clevis on them that has a diameter of 1/2 of an inch.
These are recommended for the tall safety chain loops by Reese for underbed rail kits part # RP58468 so they should work great for you.
view full answer... - Could 1-7/8 inch Hitch Ball Fit in Clevis Adapter # BWTS35100B
- The diameter of the hole on the platform of the # BWTS35100B is 1-1/4 inch so a 1-7/8 inch hitch ball like the part # C48810 would fit.
view full answer... - How To Hook Up a Vineyard Trailer
- The Vineyard Trailers appear to use a tang style clevis connection. In order to attach to this I recommend the B&W Tow & Stow 2-Ball Mount part # BWTS10037B with Clevis Adapter for B&W Tow & Stow 2" Ball Mounts part # BWTS35100B. You can then use the Curt Clevis Pin with Handle and Clip part # C45803 to complete the setup.
I have attached a video below that goes over the connection more in-depth.
view full answer... - Safety Chain Hook Recommendation for a 2011 Chevy Silverado 2500HD
- I have a clevis hook that may work. Take a look at part # 6495-401-04 . This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter.
The Curt Clevis Hook, # C81970 , has a 40,000 lb weight capacity and the pin that connects through the chain is just over half of an inch (.52 inches) in diameter. This hook was designed for heavy-duty applications such as gooseneck trailers, but it may work with your trailer if the chains...
view full answer... - Safety Chain Clevis Hooks Available in Various Sizes to fit Touareg Safety Chain Eyelet
- I have a few options for you to consider, but I do not have the exact specs of the safety chain loops on your Touareg so you would need to pick from the following to see which would be the best solution.
We have Clevis hooks in various diameters that will attach to your safety chains. Here they all are:
For a 3/8 inch hook we have the # 6495-401-04
For a 5/16 inch hook we have the # 6495-301-04
For a 7/16 inch hook we have the part # C81970
For a 5/8 inch hook part # C81920
view full answer... - Safety Chain Hook Availability for Class V Curt Hitch
- Take a look at part # 6495-401-04. This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter.
The Curt Clevis Hook, # C81970, has a 40,000 lb weight capacity and the pin that connects through the chain is just over half of an inch (.52 inches) in diameter. This hook was designed for heavy-duty applications such as gooseneck trailers, but it may work with your trailer if the chains are large enough. The width of the...
view full answer... - Ball Mount Recommendation for a Polaris Ranger UTV with 2 inch Hitch
- For a UTV a lot of guys like the part # C45009 which has a 2 inch ball and a clevis bar or the part # C45005 which has a 1-7/8 inch ball and the clevis bar. Both of these have a 1/4 inch rise.
view full answer... - Recommended Ball Mount with 2 Inch Rise and 2 Inch Ball for ATV Hitch
- The Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs # C45270 is a longer ball mount with a 2 inch rise that will work well. The 2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs # 40038 would also be a great fit. You won't get the clevis bar with this option but it is the only upgrade from the # C45009.
view full answer... - Which Accessories Fit In The Curt Channel Ball Mount C45900?
- I would be happy to help.
It sounds like you are looking for the Demco 2-Tang Clevis # DM12676-95 which will fit perfectly in the Curt Channel Style Adjustable Ball Mount # C45900 you have. The clevis bolt is not included but a 1" diameter bolt can be picked up from a local hardware store.
For your channel ball mount there is also the Curt Channel Mount Forged Pintle and Ball # C45920, and the Step for Curt Adjustable Channel Ball Mounts # C45909.
I included videos of the products mentioned...
view full answer... - B and W Tow and Stow Ball Mount Recommendation that Has Pintle Hook
- The Clevis Adapter part # BWTS35100B that you referenced can be installed on the B&W Tow & Stow 3-Ball Mount # BWTS10050B that you referenced. However, this adapter is not designed for use with a pintle setup.
A better solution would be for you to go with the B&W Tow & Stow Pintle Hook with 2-5/16" Ball # BWTS10056 if you also need to tow a trailer with a lunette ring.
view full answer...
Go To Results